$2,989.28
In stock
SKU
RST100B
RST100B RemoteSAT RST100B
RST100B RemoteSAT RST100B
RemoteSAT RST100B satellite terminal combines the robust design with the intelligent technology to support RJ11 / POTS, voice and data services over the Iridium satellite network. The RemoteSAT terminal is equipped with a range of interfaces to support the use of standard corded/cordless phones or integrated PABX communications.
Overview
RemoteSAT has been designed to be used in fixed site, maritime and emergency service applications where permanently installed reliable communications services are required. The RemoteSAT device enables a Beam TrackALERT RST030 alert tracking interface to be connected directly to the terminal and there is also a purpose built back-up battery available that can provide up to 24 hours standby time for mission critical applications.
Benefits
The terminal is capable of presenting dial, busy and ring tones to suit country-specific requirements as well as auto-dial or restricted dial functionality. The terminal also supports access to the complete range of data services provided by Iridium including Short Burst Data, Circuit Switched Data and Direct Internet as well as SMS
How it Works
RemoteSAT has been designed to be used in fixed site, maritime and emergency service applications where permanently installed reliable communications services are required. The RemoteSAT device enables a Beam TrackALERT RST030 alert tracking interface to be connected directly to the terminal and there is also a purpose built back-up battery available that can provide up to 24 hours standby time for mission critical applications.
Sea
- Crew calling
- Captain and crew calling from one unit
- Connect to ship’s PBX
- Reduced cost shore to ship communications
- Installed as part of an SSAS system
- Installed as part of a tracking system
Land
- Connection to PBX system
- Inbuilt satellite communications
- Emergency back-up
- Remote work site
- Roadhouse
- Interim Phone Service
- Transport application where cordless handset required
Air
- Aircraft in which cordless or standard telephone handsets are required for specific installations
Technical Specifications & Features
- Supports standard phone equipment
- Connect to PABX
- Compact intelligent handset
- Uses intelligent handset
- SMS/SMSMO from terminal
- Supports SMS over POTS
- SSAS compatible
- Tracking and monitoring capable
- Intelligent processor and interface
- Phone number processing
- Line reversal for payphone use
- Auto-dial and speed dial options
- Secure SIM card enclosure
- Local and remote configuration
- External ringer available
- Supports back-up battery
- Incorporates call logging
- Fully certified against corrosion/vibration
- Easy to install
Power Specifications
Power input voltage | 11 – 32 V DC | |
Power consumption (AMPS) | 12 VDC | 24 VDC |
Stand by | 0.35 | 0.16 |
Transmit | 0.51 | 0.25 |
Stand by – incl handset | 0.47 | 0.22 |
Transmit – incl handset | 0.59 | 0.29 |
Environmental Specifications
Power input voltage | 11 – 32 V DC | |
Power consumption (AMPS) | 12 VDC | 24 VDC |
Stand by | 0.35 | 0.16 |
Transmit | 0.51 | 0.25 |
Stand by – incl handset | 0.47 | 0.22 |
Transmit – incl handset | 0.59 | 0.29 |
Connectors / Interfaces / LEDs
- Intelligent handset
- RJ45 DPL BUS
- Telephone/POTS
- RJ-11 2-wire / TN12 or 600 ohm
- Data port
- RS232 serial interface
- RS232 serial interface power
- 2 Pin screw type
Connectors / Interfaces / LEDs
- Power: Green
- Signal: 3 Colour
- Call: Yellow
- Voicemail: Green
Certifications
- IEC60945
- Germanischer Lloyd
- American Bureau of Shipping
- Electrical safety
- EMC compliance
- C tick
- CE compliance
RST100B RemoteSAT Kit Contents
- RST100 Main terminal
- Mounting brackets
- AC 110/240V plug pack
- DC 1.5m power cable
- Data cable
- User and installation manual
- CD – Beam management system, AT commands, manuals
Brand | Beam |
---|
Write Your Own Review